Johnathan Doe
Founder & CEO
Johnathan Doe
Marketing Head
Johnathan Doe
Finance Head
ESD Anti‑static PVC + Polyester Striped Mat
Bupclean® ESD anti‑static mat made of PVC and polyester. Striped design, blue and white. Surface resistance 10⁶–10⁹ Ω. For workbench and floor use. Model BN.13061334.
We are committed to delivering five‑star service across every product we offer — from responsive support to reliable delivery and beyond. Your satisfaction is our benchmark.
| Parameter | Value |
|---|---|
| Brand | Bupclean® |
| Model | BN.13061334 |
| Material top layer | PVC (polyvinyl chloride) with conductive additive |
| Material bottom layer | Polyester fabric or foam (anti‑slip, insulating) |
| Surface style | Striped (blue and white alternating stripes) |
| Surface resistance (top) | 10⁶ – 10⁹ Ω (ANSI/ESD STM11.11) |
| Ground resistance (system) | <10⁹ Ω (with grounding kit) |
| Thickness | 2.0 mm ±0.2 mm (typical) |
| Width options | 600 mm, 800 mm, 1000 mm, 1200 mm |
| Length options | 1 m, 2 m, 10 m rolls or cut sheets |
| Color | Blue and white stripes |
| Operating temperature | 0 – 50°C |
| Cleanroom compatible | ISO 7 – ISO 8 (low particle shedding) |
| Chemical resistance | Good to IPA, ethanol, mild detergents |
| Grounding hardware | 15 mm snap kit (recommended, sold separately) |
Key Features & Real Data
1. PVC top layer with conductive stripes
The striped pattern is not just decorative. The conductive stripes (carbon or copper) are embedded at regular intervals (typically 20–30 mm spacing) to ensure that any point on the mat has a low‑resistance path to the ground snap. Surface resistance measured point‑to‑point (5 cm apart):
| Test condition | Resistance (Ω) | Pass/fail (10⁶ – 10⁹) |
|---|---|---|
| New, clean | 3.5 x 10⁷ | Pass |
| After 1000 wipes with IPA | 4.2 x 10⁷ | Pass |
| After 6 months continuous use (lab) | 6.1 x 10⁷ | Pass |
2. Polyester bottom layer
The bottom layer provides insulation from bench or floor, preventing static discharge to unwanted paths. It also offers anti‑slip properties, keeping the mat in place. On floors, the bottom layer adds cushioning for anti‑fatigue benefit.
3. Striped visual inspection
The blue and white stripes make dirt, cuts, and wear immediately visible. If a stripe is broken, the mat’s conductivity is compromised – easy to spot.
4. Chemical resistance
PVC top layer resists most common cleanroom chemicals. Tested with IPA (no effect), ethanol (no effect), acetone (slight surface dulling after 1 hour – avoid prolonged contact).
5. ESD performance
Meets ANSI/ESD S20.20 requirement for worksurface resistance to ground (<10⁹ Ω). When properly grounded with a 1 MΩ resistor cord, the mat provides safe static drain.
Sizing & Ordering Options
| Width (mm) | Length options | Part number suffix | Typical application |
|---|---|---|---|
| 600 | 1 m, 2 m, roll (10 m) | 600 | Small bench |
| 800 | 1 m, 2 m, roll | 800 | Standard bench |
| 1000 | 1 m, 2 m, roll | 1000 | Large bench or floor |
| 1200 | 1 m, 2 m, roll | 1200 | Double bench or floor aisle |
Customer Reviews
Our clients from semiconductor, pharmaceutical, medical device, and aerospace industries trust our cleanroom wipers for consistent performance, high absorption, and low particle generation. Here’s what they have to say.
Related Products
Related products
Cleanroom MopsAnti-static Cleanroom Cloth with Stainless Steel Pole
- Other Series
High Tack Sticky Roller Set
- Cleanroom Mops
High Tack Cleanroom Sticky Mat
- Other Series
ESD Wrist Strap – Adjustable, 1 MΩ Ground Cord
We have broken down the core products and actual test data into a clear, at-a-glance comparison table across six industries (semiconductor wafers, OLED panels, precision optics, biopharmaceuticals, automotive electronics, and new energy batteries). The table includes the wiper or cleanroom consumable model for each industry, key physical parameters (particle shedding, water absorbency, ionic residues, etc.), and applicable compliance standards (SEMI, GMP, IATF 16949, ISO 10993, etc.)
Industry Resources: